User Guide

– 18 –
99 PROGRAM FEATURE
The oven is preprogrammed with 9 programs as standard. The oven can be reprogrammed to enable all
99 programs by your local Hobart Service ofce.
• To select a program, enter the desired program number
from 0 to 99.
• Program display ashes.
• Press
ENTER
to accept (or, press
CLEAR
to void and
reenter).
OPERATOR ID FEATURE
The oven is preprogrammed with Operator ID "off" as standard. The oven can be reprogrammed to enable
Operator ID "on" by your local Hobart Service ofce.
After main power switch is toggled on. . .
Temperature displays "Id" and Time display blinks.
• Enter Operator ID number from from 0 to 9999.
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
The control returns to idle mode.
TEMPERATURE
TIME

F

C
PROGRAM
 AM

PM
STEP
1  2  3  4 
9:30
1
TEMPERATURE
TIME

F

C
PROGRAM
 AM

PM
STEP
1  2  3  4 
0
Id
CLEANING THE TEMPERATURE PROBE (Optional Accessory)
Clean the temperature probe after every use.
1. Remove the probe from the probe holder.
2. Unplug probe cord from the probe receptacle (if needed).
3. Wipe the probe with a cloth moistened in a soap and water solution.
• Rinse in clean water and allow to dry.
• Dry with a soft cloth.
4. Carefully plug probe cord back into the probe receptacle (if needed).
5. Place probe back in probe holder.