Oven User Manual

– 8 –
PLUMBING CONNECTION
WARNING: PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE SANITARY, SAFETY
AND PLUMBING CODES.
Water Supply Connection (Fig. 7)
The rotisserie oven is equipped with a water bath system in the bottom of the rotisserie oven. It can be
connected to the potable water supply at the
1
/2" (1.3 cm) NPT supply valve connection. A flexible
connection is recommended to allow for rotisserie oven movement.
Drain Connection (Fig 8)
A 1
1
/2" (3.8 cm) NPT drain connection is also provided. If connecting to a drain, make sure the drain is
connected to a grease trap.
PL-41690-1
WATER
VALVE
PL-41655-1
DRAIN CONNECTION
Fig. 7 Fig. 8
ELECTRICAL CONNECTION
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
WARNING: THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE
OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE
RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.
Do not plug in until after the gas connection has been made and checked for leaks.