GAS FRYERS WITH OR WITHOUT FILTER-IN-A-DRAWER Instructions Manual MODELS HGF35 ML-126994 HGF45 ML-126995 HGF65 ML-126996 HGF85 ML-126997 HGFD35 ML-126416 HGFD45 ML-126417 HGFD65 ML-126418 HGFD85 ML-126419 HGFC35 ML-126420 HGFC45 ML-126421 HGFC65 ML-126422 HGFC85 ML-126423 HGFD45 FORM 35614 (February 2004) HGF35F ML-135536 HGF45F ML-135537 HGF65F ML-135538 HGF85F ML-135539 HGD35F ML-126953 HGD45F ML-126956 HGD65F ML-126959 HGD85F ML-126962 HGC35F ML-126954 HGC45F ML-126957 HGC65F ML-126960 HGC85F ML-1

– 31 –
DAILY FILTERING
WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,
CLEANING AND SERVICING THE FRYER.
Filtering Guidelines (All Models)
• Stand alone fryers are available in filter-ready and non-filter-ready versions.
• Battery interplumbing is available only on fryers equipped with Filter-In-A-Drawer.
• A cold fryer will not drain properly. Always filter shortening in a liquid state. The shortening under
the cold zone area will remain hard, even if the heat is on for a few minutes. If necessary, use
the cleanout rod to carefully stir the hard shortening to an area above the cold zone (Fig. 8)
where it will melt.
• Filter shortening at least once a day (see Shortening Life on page 33).
Fig. 8
Filter-Ready Fryers (For Use With Mobile Filter Only)
• The Mobile Filter is covered in a separate instruction manual. Follow the instructions.