GAS FRYERS WITH OR WITHOUT FILTER-IN-A-DRAWER Instructions Manual MODELS HGF35 ML-126994 HGF45 ML-126995 HGF65 ML-126996 HGF85 ML-126997 HGFD35 ML-126416 HGFD45 ML-126417 HGFD65 ML-126418 HGFD85 ML-126419 HGFC35 ML-126420 HGFC45 ML-126421 HGFC65 ML-126422 HGFC85 ML-126423 HGFD45 FORM 35614 (February 2004) HGF35F ML-135536 HGF45F ML-135537 HGF65F ML-135538 HGF85F ML-135539 HGD35F ML-126953 HGD45F ML-126956 HGD65F ML-126959 HGD85F ML-126962 HGC35F ML-126954 HGC45F ML-126957 HGC65F ML-126960 HGC85F ML-1

– 25 –
TEMPERATURE AND TIME PROGRAMMING
Temperature
1. Press
to enter program mode. PROGRAM is displayed in the window.
2. Press
to enter temperature mode. 000°F and TEMP are displayed in the window.
3. Press
through to enter desired fry temperature. The fry temperature is displayed in the
window.
4. Press
to exit the temperature mode. Press again to exit program mode completely.
Time
There are ten timers with advanced timing features on the HGC fryer for setting fry times on multiple
products.
Timers
through :
1. Press
and enter the program mode. PROGRAM is displayed in the window.
2. Press
. The LED's on timers through are lit and SELECT PRODUCT is displayed in
the window.
3. To select a timer, press one of the lit timer numbers; CK# 00:00 and TIME are displayed in the
window.
4. Enter the desired time using keys
through . The time is displayed in the window. After
entering the time, press
; SELECT PRODUCT is displayed in the window and the LED's on
timers
through are lit.
5. Repeat steps 3 and 4 to program the remaining timers, or press
to exit the program
completely.
Dispose (continued)
• Turn power switch off and open the drain valve.
• Discard the shortening into suitable discharge container.
• Close the drain valve and fill the vat with shortening.
• Turn power switch on.
• Enter the programming mode, select the dispose parameter and reset the actual filter count to
zero. This will also reset the actual cook count to zero.
NOTE: The dispose prompt can only be reset by resetting the actual filter count or disabling the
parameter.
NOTE: The filter prompt takes precedence over dispose.
See Daily Filtering on page 31 for more information.