HG SERIES GAS FRYERS WITH OR WITHOUT FILTER-IN-A-DRAWER Instructions Manual MODELS HGFS25 ML-126410 HGS35F ML-126952 HGFS35 ML-126411 HGS45F ML-126955 HGFS45 ML-126412 HGS65F ML-126958 HGFS65 ML-126413 HGS85F ML-126961 HGFS85 ML-126414 HGD35F ML-126953 HGFD25 ML-126415 HGD45F ML-126956 HGFD35 ML-126416 HGD65F ML-126959 HGFD45 ML-126417 HGD85F ML-126962 HGFD65 ML-126418 HGC35F ML-126954 HGFD85 ML-126419 HGC45F ML-126957 HGFC35 ML-126420 HGC65F ML-126960 HGFC45 ML-126421 HGC85F ML-126963 HGFC65 ML-126

– 31 –
DAILY FILTERING
WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,
CLEANING AND SERVICING THE FRYER.
Filtering Guidelines (All Models)
• Stand alone fryers are available in filter-ready and non-filter-ready versions.
• Battery interplumbing is available only on fryers equipped with Filter-In-A-Drawer.
• A cold fryer will not drain properly. Always filter shortening in a liquid state. The shortening under
the cold zone area will remain hard, even if the heat is on for a few minutes. If necessary, use
the cleanout rod to carefully stir the hard shortening to an area above the cold zone (Fig. 7)
where it will melt.
• Filter shortening at least once a day (see Shortening Life on page 33).
Fig. 7
Filter-Ready Fryers (For Use With Mobile Filter Only)
• The Mobile Filter is covered in a separate instruction manual. Follow the instructions accordingly.
OIL LEVEL
COLD ZONE
PL-50580