Product Manual

 A complete Parts List is available at www.HobartWelders.com
OM-272 180 Page 13
SECTION 5 − INSTALLATION
5-1. Selecting A Location
loc_2 3/96 - Ref. 804 852-A / 227905-A
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
1 Lift Handle
Use lift handle to lift and move unit.
10 in.
(254 mm)
10 in.
(254 mm)
! Do not move or operate unit
where it could tip.
5-2. Connecting Work Clamp
 Do not connect work clamp to
the portion of the workpiece
that will fall when cut.
1 Work Clamp
2 Workpiece
Connect work clamp to a clean,
paint-free location on workpiece, as
close to cutting area as possible.
1
2
Ref 803 640-A