INSTRUCTION MANUAL . « . with Catalog of Replacement Paris HOBART MODELS 5012 and 5012-D MEAT SAWS Spec. #9316 STANDARD Spec. #9103 DELUXE THE HOBART MANUFACTURING COMPANY The World's Oldest and Largest Manufacturer of Computing Scales y § and Food Store, Kitchen, Bakery and Dish washing Machines TROY, OHIO, U.S.A. FORM 4177 (First Edition} (Dated Oct.
INSTRUCTIONS 5012 Installation, Operation and Care of MODELS 5012 and 5012-D MEAT SAWS 1— UNPACKING Remove the shipping box that covers the saw. Next, unpack the table, carriage support, carriage and the four feet which were disassembled for shipping purposes. (Instructions for reassembly are given in “Setting-up” secretion. Unpack the serape pan inside the cabinet. Remove the four retaining bolts from the underside of the skid. SETTING UP (1} Place the machine in the location where used.
5012 INSTRUCTIONS FIG. 2 (2) Apply a few drops of oil occasionally to the Gage plate screw (6, Fig. 4) and work the gee plate assembly back and forth a few times, {3} Once a year, have a Hobart service man ook over the motor and main bearing carriers.
INSTRUCTIONS 5012 FIG. 4 (9) Remove upper and lower pulleys by swinging the pulley retaining lathes (2, Fig. 1) clear of the shafts, Slide pulleys off. Clean pulleys and oil bore before replacing. All areas are now exposed for easy thorough cleaning. NOTE: When replacing pulleys, make sure that pulley lathes are properly seated in grooves of shaft. Also the blade and pulley wipers must be in proper operating positions.
M REPLACEMENT PARTS 5012 BASE AND MAIN FRAME UNIT ILLUS, PART PLATE NO. NAME OF PART AMT. 1 FE-638 Reducer (3/4” to 1/2" Female Cd) 1 2 FE6 Lock Nut 3/4” Ond. __ 1 3 FE-2-17 Connector 800 (1/2” Male Thd. x 2 & P-2412788 Conduit 1/2” x 327 Flex. .. 1 5 BF-2-19 Bushing 1/2" Anti-Short z § S-E1280 Base Cover Plate Says. 1 7 M-TI576 Stop Carriage 1 8 RP-35 Roll pin 1/47 dis. M-67317 Spring Carriage Stop 1 10 P-67300 Switch Box Says. 1 11 80928 Mach. Screw #1024 x 3/8% WK-3-20 Lock Washer #10 x .055" x 040" .
REPLACEMENT PARTS 5012 TABLE, TRACK AND CARRIAGE UNIT ILLUS. PART PL-4185 NO. NAME OF PART AMT. 1 5.67162-1 Table Say. 1 2 $0-1048 Mach. Resew #10.24 x 1/4¢ Truss Ha, 1 2 NS21.3 Acorn Nut 1 4 R-71438 Plate Pusher .. 1 5 SC-15-94 Mach, Screw #30-24 x 1/2” On 2 6 NS-24-18 Acton Nui #1024 2 7 P11975 Pusher Plate Bracket 1 8 R-72061 Pusher Plate Says. (Incas. Stem 1 2 72598 1 10 PT284T . 1 11 PT-3-59 Taper Pin #4 x 8/¢" 8-60-32 Mach.
5012 REPLACEMENT PARTS LL us, PL-3023 @0 Zorn oo ne BNBENREERERyuErEERE PART No., 8O40-70 Wed-2 BUTT BB-§2 P-87183 P-67813.3 R-8T247 M-89595 M-87150 V-7483-2 M-87315 M-87181 EB7170-2 . i S GAGE PLATE UNIT NAME OF PART Cap Erse x 17 Soc. Fil. Hd. Lock Washer 3/8" x 136" x 070" _ Bracket Gage Plate Rear Support .. Ball Bearing Nice 240024 Sower Gage Plate Gage Plate Support & Bushing Says. Gage Plate Support & Bushing Says. Gage Plate & Weld Stud Says.
O PART NO. SC-12-81 M-T1368 NS-5-28 M-71863 8-21-14 WIENIE M-T2443 R-67500-2 M.71364 P.T1376 R-67500-7 871360 V23326 23275 B-23328 S-71878 REPLACEMENT PARTS LOWER WIPER AND GUIDE UNIT NAME OF PART Mach. Resew #10-24 x 1% Fil. Hd. Guide Saw. Blade Mach, Nut #10-2¢ Hex Guard Saw Blade Mach. Resew #10-2¢ x Rd, Fd. Mach, Screw #10-24 % 1/2” Truss Hd. Wiper Lade Futile .. Set Screw #10-2¢ x 1/4” S Bracket Scraper Pivot . Set Resew #1024 x 5/16” Dowel Mach, Screw Slide Lows Wiper Bret. Slide way Wiper Bret, Fin.
ILLUS. PART PLEBE NO. 1 £0-52-16 2 M-69849 3 P-69814 4 M-67289 5 V12784 s M-67427 T PB-246 8 P7129T2 8 $C-10-33 10 V21158 1 M-67315 12 R71361 13 V-25336 14 M-23275 15 328328 16 M-71382 1w MT1878 1. MITT 13 8C724 20 M-67182 2t 5-10-36 22 M-67233 28 71440 24 M67237 25 WL 2% NSA7-20 27 P.71359 28 SO-75.5 20 M-71388 3 $C-10-33 31 RA71357 3 R-67500-2 33 M-71364 34 P-11378 % R67500-7 % MB7315 3t V21158 3% M-67306 3 SC-21-85 40 W41 4 M-6718¢ 2 M-67185 a5 4 OWL-1 PT13382 R.
illus, PART PL-4517 NO. 1 $C-10-36 2 R-67151-3 *3 R-87151-2 4 $C-12-69 5 P-67210 6 M-67241 7 8-13-46 & BR-2-18 9 R-67206 10 N-13-22 11 Wed-4 iz P-67147 13 P-67187 14 Wield 15 NS-13-£2 18 M-68139 17 Ward-4 i3 M-17813-2 15 V20858 20 V-20880 21 M-23338 BC-53-5 *34 M-67180-3 *25 NE-27-2 *36 M-23271-2 37 BC-53-5 *38 8-58-3 39 67447 40 41 SC-10-44 42 P-6T244 43 8-10-38 44 M.
