Kitchen Utensil User Manual
– 3 –
Installation, Operation, and Care of
Model 2812PS Slicer with Portion Scale
SAVE THESE INSTRUCTIONS
GENERAL
The Hobart Model 2812PS Slicer with Portion Scale displays the weight or slice count as the sliced
product falls to the platter. Four preset values (P1 thru P4) can be programmed with weight or slice
count and are readily accessed for portioning. A memory register (M) allows any current weight or key
entered weight or slice count to be used for portioning. The scale display can Tare to indicate Net
weight but is
NOT
LEGAL
FOR
TRADE
. The model 2812PS slicer is equipped with a
1
/2 HP motor and is
available for single-phase electrical service. The slicer features the exclusive Hobart Stay-Sharp
contoured cast solid stainless steel knife. The slicer is furnished with a cord and plug as standard
equipment. Other features and options include:
The Power Interrupt feature, standard, requires the slicer to be manually re-started after a power
interruption.
The Gauge Plate and Carriage Interlock feature, standard, prevents the Carriage Tray from being
removed unless the Carriage is in the H
OME position (pulled all the way to the front) and the Gauge
Plate is C
LOSED. When the Carriage Tray is tilted horizontally, the slicer will turn OFF if it has not
previously been turned O
FF. Once the Carriage Tray is tilted horizontally or removed, the slicer cannot
be started and the Gauge Plate cannot be opened until the Carriage Tray is returned to its normal
operating position.
The HomeStart feature, standard, requires the carriage to be in the H
OME position before the slicer
can be started.
If equipped with the AutoShutoff option, the slicer will turn off if a full stroke of the carriage has not
been made within a 10 second interval. The AutoShutoff option is factory installed only.
A tubular food chute and a 4" leg set are available accessories for 2812PS. The low and high carriage
fences are accessories used only with front-mounted meat grips. The standard meat grip is front-
mounted. Heavy front-mounted meat grip is an available accessory.
MODEL 2812PS SLICER
©
HOBART CORPORATION, 1998