Electric pressurized steam sterilizer I N S T R U C T I O N S Please read carefully this instruction before you install and use this product. Please always take good care of this instruction and treat it as an important component part of this product. Please take good care of the invoice and warranty card after purchasing this product.
CATALOGUE 1. Security considerations………………………………………………………………2 2. Application of product………………………………………………………………2 3. Security classification of product ………………………….………………………..2 4. Classification of the products ………………………………………………………..2 5. Structure of the products…………………………………………...…………………4 6. Technical parameters …………………………………………..……………………..6 7. Application procedure ………………………………………………………………..6 8. Points for attention……………………………………………………………………7 9. Maintenance of the product…………………………………………………...………8 10.
Dear Customer: Thank you for purchasing our instrument, please take your time to read carefully the instructions before starting to use this Electric pressurized steam sterilizer, please also pay special attention to those letters in bold, which can be very useful for maximizing the functions of the instruments. Please take good care of this instrument after reading it for future use.
automation to operate the instrument.B.Please refer to the above Classification and your model of the products,choose the following different instructions with different degree of automation to operate the instrument. 2、The model of the product Different type Electric pressuriz ed steam sterilizer Electric source / Product model Volume XFS（H）—30M（C）A 30 220V/50Hz 3.5KW XFS（H）—40M（C）A 40 220V/50Hz 3.5KW XFS（H）—50M（C）A 50 220V/50Hz 3.5KW XFS（H）—60M（C）A 60 220V/380V/50Hz 4.
Ⅴ．Structure of the products 1.
Notes: automatic water charging instrument(need to be custom-designed),you can add an admission pipe in the bottom of the instrument. Please contact us freely when you have this need.
Ⅵ．Technical parameters 1. Working pressure：0—0.142MPa，working temperature:50-126degree. For self control type,please use the pressure switch to control.For automatic type,you are free to set the working temperature,but please take note that the temperature can not more than 126℃. 2. working voltage: 220V/50Hz（30litres、40litres、50litres、60litres、75litres）、380V/50Hz（100litres、150litres、200litres、 250litres） Ⅶ．Application procedure Please refer to your model of the products and above(4.
1. Make sure the power supply coincide with the source of your instrument and be adequately grounded before you plugged into electricity. 2.open the lid of the instrument,take out the inner cylinder,then you will see electric heating tube. 3.
3.The security valve and the exhaust steam valve should be sent to qualified organization to check regularly to ensure the safety. 4.The volume of the inner cylinder can not be more than 4/5 of the total volume of the instrument. 5. Make sure the sealing ring not contact the oil to avoid steam loss because of the broken adhesive tape. 6. Things which are easy to explode when contacts the steam or boost abruptly during the sterilization are both strictly prohibited. 7.
although the Water spilled from the cyclinder. 2、 The water level detector is already electrolyzed by some adulterants 2 5、 The instrument doesn’t arise temperature or 1、 The power supply don’t connect pressure or the shell of the instrument with electricity well. 6、 Examine the power taps. 7、 Repalce promptly 2、 electric heating tube is broken. 3 There is steam in the pressure gauge. steam leakage between The connection Tighten the connections.
and Hongsong Road, New & High-Tech Development District, Zhengzhou City, Henan Province, China Model of the product:XF TEL: +86-13598894736 Product number: Buyer: Buyer commissioned: Buying date: Guaranteed Conditions A、The conditions for free maintenance service: 1.If the material of the instrument is not good or there is some problems in design and manufacture ,then we can give free maintenance service according to the certificate within one guarantee year after the invoice date. 2.
Warranty card model Product name buyer Address TEL supplier production The instrument date number DATE Repair record Notes: Purchasing date Invoice number trouble - shooter 1.please fill the blanks on the two copies of this warranty card,please send back the 2nd copy of this card to our technical department within 2 months after you purchasing this instrument(Add: Room 104, Building No.
Maintenance receipt model Produce name Purchasing date buyer Address TEL SUPPLIER production date The instrument Invoice number number DATE Notes: Repair record trouble - shooter 1.please fill the blanks on the two copies of this warranty card,please send back the 2nd copy of this card to our technical department within 2 months after you purchasing this instrument(Add: Room 104, Building No.
