Instruction Manual

14
13
14
15
16
11
10
33
25
5
20
21
25
17
18
33
11
17
18
FIG.3
FIG.2:
Remove the bolts from the seat (16),
then tighten seat (16) to seat post (13)
with the flat washer (15) and nylon nut
(14). Insert the seat Post (13) into the
main frame (11) and line up the holes.
Secure the seat in position with the
Adjustment knob (10).The correct
height for the seat can be adjusted after
the bike is fully assembled.
FIG.2
FIG.3:
Connect the Sensor Wire (17) and middle line
(25). Connect Tension Control wire (18) and
(33) as shown in FIG.3. Fix the Upright Post
(21) to the Main Frame (11) with Bolt (20) and
Arc Washer (5).