User Guide

5G Starterkit User Guide
HMS Industrial Networks AB Page 8 of 12
Cellular Configuration
Go to “Home > Cellular > Cellular Settings” to configure the cellular settings:
• APN
- For some networks this can be left empty
- For other networks the APN needs to be configured manually
• User Name
- Can normally be left empty
• Password
- Can normally be left empty
• Network type
- This setting can usually be left on “Auto”
- Alternatively, a specific technology can be chosen. E.g. LTE+NR5G which indicates a 5G non-
standalone system
After the parameters have been changed, the “Submit” button should be pressed. To connect to
the network, the “Connect” button is pressed and in order to make the changes permanent, the
“Save” button should be pressed.
After connecting, the status can be seen on “Home > Cellular > Cellular Status”: