User Guide

5G Starterkit User Guide
HMS Industrial Networks AB Page 7 of 12
Software Configuration
Web GUI
The web GUI of the Wireless Router can be accessed from a PC connected to the Ethernet port. The
default IP address of Wireless Router is 192.168.10.1/24.
The configuration of the Ethernet interface of the PC should be:
IP address: 192.168.10.100
Netmask: 255.255.255.0
GW: 192.168.10.1
The web GUI can be reached from the PC by entering 192.168.10.1 into a web browser. The default
credentials are:
Username: admin
Password: admin
Optional: Factory Reset
Factory reset of the device can be performed by inserting a paper clip or similar into the small hole
on the front of the Wireless Router marked “Reset” and pressing the button for at least 7 seconds.
Optional: Firmware Upgrade
The 5G Wireless Router firmware can be found on https://www.hms-
networks.com/technologies/5G/5G-solutions-starterkits.
Go to “Home > Firmware Upgrade” to upgrade the 5G Wireless Router.