User Guide

5G Starterkit User Guide
HMS Industrial Networks AB Page 10 of 12
Test the Dashboard
At this stage it should be possible to reach the dashboard from the tablet.
Start a web browser on the tablet and type in the IP address of the Cellular IP of the Wireless
Router.
Optional: Dashboard Application Software Update
The Starterkit dashboard and other functionality is implemented in the small gateway next to the
orange IO-Link master.
First turn off the power to the Starterkit by unplugging the power supply from the mains outlet.
To upgrade this gateway, the SD card inserted at the top of the gateway should be removed (the SD
card is located close to the power connector).
The Dashboard Application Software can be found on https://www.hms-
networks.com/technologies/5G/5G-solutions-starterkits.
Insert the SD card into a laptop with a micro-SD card slot.
Download the new software. After downloading the new software, the name needs to be changed
to:
sc145update.tar.gz
After changing the name, the software should be copied to the directory:
lrupdate
Remove the SD card from the laptop and place it into the gateway again.
Power on the Starterkit again by connecting the power supply to the mains outlet.
After power is applied, the gateway will be upgraded. The upgrade takes around 8 minutes. After
the upgrade is completed, the stack light will start flashing again.