Operation Manual
29
ENGLISH
Before the rst use:
Before rst using your smartLAB
®
walk B step counter, please hold the „Disp/Set“
button pressed for more than 3 seconds. The device will go on and enters the setting
mode.
The smartLAB
®
walk B step counter has an automatic setup function (Heart Beat). This
way there is no need to setup the step counter manually. Please refer to Heart Beat
section for more details.
Setting weight, step length, signal tone und time:
Setting weight:
1. Press the “M/” button and choose between „kg“ and „lb“. In order to conrm
your choice, please press the „Disp/ Set“ button.
2. After you choose your unit, the weight indicator will ash. Now you can enter
your personal body weight and conrm by pressing the “M/” button. The
possible weight range is between 30 and 200 kg.