Operation Manual

ENGLISH

Insert/ Change of batteries

The smartLAB® rope uses a CR 2032 3V battery. This battery is

included in the set. To insert or change the battery please follow

these instructions:

• To exchange the battery you need to open the

battery lid with a coin in direction of the arrow.

• Insert the battery into the battery lid with the

plussidetothelid.Ifexchanging,rstremove

the battery carefully

• Close the lid by using the coin again.

The smartLAB® rope has a Stand-By Mode. As soon as the de-

vice has not been moved for several minutes, it will go into the

Stand-By Mode - to reduce the energy-consumption.

The skipping rope, the handels as well as the batteries must be

disposed of according to the local regulations.

Note: After a battery change, you need to set date and time of

the device again. Your saved data will stay on your device when

changing the batteries. An automatic setting of your data is en-

abled by an App.