Operation Manual

37
ENGLISH
* For more information on the Gateways please visit www.hline-online.com or www.fitmefit.com
The smartLAB
®
fit W Body Analyser Scale recognizes automatically
through your weight, which person is currently standing on the
scale and uses his user profile. This automatic function requires
that you once select the desired user and weigh yourself after
that. Future measurements will be recognized automatically.
Data transfer to other wireless data transmitting devices
You can connect your smartLAB
®
fit W with a partner device which fulfills the
standard protocol of ANT or BLE wireless data transfer. You can transfer meas-
ured weight values automatically and wireless to the device. Partner devices
could be laptops, smartphones, tablets or any other ANT or BLE-capable de-
vice. The communication will be enabled by a gateway* which can be installed
on PC, Smartphone or Tablet.
When you measure only the weight you should select the user
in order to transfer the data to the correct user database. Just
select the user number by pressing the “Set” button and the
desired user through the up and down arrows. The smartLAB
®
fit
W Body Analyser Scale saves the last user who was selected.
Optional: Weighing on a carpet
You can use the smartLAB
®
fit W Body Analyser Scale with the extension feet
on a carpet. For this please follow these steps:
1. Remove the non-slip pads from
the scales feet
2. Fit the extension feet firmly onto
the scales feet. Now you can use
the scale on a carpet.