Operation Manual

36
The smartLAB
®
fit W Body Analyser Scale recognize automatically
through your weight, which person is currently standing on the
scale and uses his user profile. This automatic function requires
that you once select the desired user and weight yourself barefoot
after that. Future measurements will be recognized automatically.
Measeuring only weight
When you step on the scale not bare-footed the scale will measure the weight
only.
Wireless data transfer
Your smartLAB
®
fit W Body Analyser Scale has an integrated ANT+ and BLE
module which enables you to transfer measured data to your computer,
laptop, PC, Smartphone or sport watch. There you can save, analyze and
process the values
When the scale has been successully paired with a receiving device, the
measured data will automatically be sent to the corresponding device such as
Smartphone or PC via ANT+ or BLE. The smartLAB
®
fit W Body Analyser Scale
will automatically select the correct data transfer technology.
What is ANT?
ANT is a wireless data transfer standard. In order to use it, both transmission-
and receiving device must be equipped with an ANT module.
What is BLE?
BLE is a wireless data transfer standard and is part of Bluetooth® Smart. In
order to use it, both transmission- and receiving device must be equipped
with an BLE module.
Data transfer via user profile
Set up your user profile according to the instructions in the “Measuring”
chapter of this manual. Your smartLAB
®
fit W Body Analyser Scale is preset
to transfer the data automatically. Please choose your user profile as it is
described in the chapter “Measuring” and start the measurement. Your
smartLAB
®
fit W Body Analyser Scale will transfer the measured data to the
receiving device automatically after the measurement.