Operation Manual

ENGLISH

Measuring

After having determined all parameters and user proﬁles body weight, adipose

and the other values can be determined.

• Please press „SET“ and choose your user proﬁle by using the arrow keys.

Do NOT conﬁrm by pressing “SET” since you would have to insert and

conﬁrm again all parameters such as gender, body weight etc.

• The measurement starts automatically after a few seconds. First of all

your smartLAB

ﬁt W Body Analyser Scale detects your body weight (left

display segment). After that the measurement of the other parameters

will start. You will see three circles on the display segments concerned

(please refer to chapter “display & functions” in this user manual). The

scale is detecting the other parameters – content of water, content of

muscles and bone mass (see picture 3).

• Finally all values are displayed (see picture 8). After a few seconds the

indication of the body weight changes into the indication of the calorie

consumption (see picture 9), then into the indication of the activity (in

kcal). In addition the activity index is indicated by the symbol “activity

index” (see picture 10). At the end your smartLAB

ﬁt W Body Analyser

Scale displays again the parameters for your user proﬁle which are the

basic data for your measured values.

Pic. 7

Pic. 8 Pic. 9

Pic. 10

Kcal