Operation Manual

34
Function setup
After the input of the activity index you will enter the function setup. The
function setup can be set to ON or OFF.
Heart Beat : This is the autmoatic setting function. Switch through the
arrows to ON or OFF and then confirm with „SET“.
Beep 1 : A long beep will be heard if the measurment is finished.
Switch through the arrows to ON or OFF and then confirm
with „SET“.
Beep 2 : 3 short beeps for tranfering only weight or 5 short beeps for
transfer of all data. This indicates that the transmission was
successful. Switch through the arrows to ON or OFF and then
confirm with „SET“.
Beep 3 : 2 long beeps will be heard if the transmission was NOT
successful. Switch through the arrows to ON or OFF and then
confirm with „SET“.
After having finished the setting up of your data the symbol “0,0” appears
on the display. The smartLAB
®
fit W Body Analyser Scale is ready to start the
measurement.
Pic. 6
Pic. 5
Pic. 3
Pic. 4