Nokia Pro Wireless Earphones (BH-701) Quick Start Guide
What’s in the box EN Nokia Pro Wireless Earphones x1 Micro USB Cable Quick Start Guide x1 x1 Ear Tips x 2 pairs 1
Product overview 6 7 2 4 1 3 5 1 Multifunction key 2 Volume up / previous track key 3 Volume down / next track key 4 LED indicator light 5 Microphone 6 Ear fin 7 Ear tip 2
Get started 1.Before using Nokia Pro Wireless Earphones, connect the Micro USB cable to a power source to being charging. When battery is low, the earphones will beep and LED indicator light will flash red. 2.Power on: Press and hold Key 1 for 3 seconds until the LED shows a white light. Power off: Press and hold Key 1 for 5 seconds until the LED shows a red light.
Pair and connect with Bluetooth 1.To go into pairing mode > press and hold key 1 for 3 seconds until the LED flashes red and white alternately. 2.Turn on Bluetooth in your device and choose “Nokia Earphones” from the Bluetooth menu to connect. Nokia Earphones Wearing your earphones For optimal fit and audio performance, adjust the ear fin and replace the ear tips with the size that best suits for you.
Using your earphones 1.Buttons Previous track 2 secs Volume up x1 Play or pause music x1 Activate voice commands x2 Answer or end calls x1 Reject calls 2 secs Switch call to device from your earphones 2 secs Next track 2 secs Volume down x1 2.Smart Earbuds Function Attrack Seperate Streaming music Incomming call 3.
Product and safety information Remote control functions may vary depending on the model of your device and application. Sound track instructions do not respond to iOS devices. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight. Bluetooth devices must, however, be within 10 meters (33 feet) of each other, although the connection may be subject to interference from obstructions such as walls or from other electronic devices.
Hearing Warning: When you use the earphones, your ability to hear outside sounds may be affected. Do not use the earphones where it can endanger your safety. The surface of this product is nickel-free. Small children Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children. Take care of your device Handle your device with care. The following suggestions help you keep your device operational. - Keep the device dry.
Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Electrical and electronic products contain a lot of valuable materials, including metals (such as copper, aluminium, steel, and magnesium) and precious metals (such as gold, silver, and palladium). All materials of the device can be recovered as materials and energy.
Implanted medical devices To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless device and the implanted medical device. Persons who have such devices should: - Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device. - Not carry the wireless device in a breast pocket. - Switch the wireless device off if there is any reason to suspect that interference is taking place.
Copyrights and other notices The availability of products, features, apps, and services may vary by region. For more info, contact your dealer or your service provider. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. The contents of this document are provided “as is”.
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
