Owner manual

Material Compatibility
ABS Non-Compatible
Buna-N Non-Compatible
EPDM Excellent
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan
Non-Compatible
Neoprene Fair
Noryl

Non-Compatible
Nylon 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Non-Compatible
Silicone Rubber Non-Compatible
Teflon
Excellent
Viton
Non-Compatible
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue.
Flux-Off

Lead-Free Flux Remover can be
used to remove all types of fluxes in batch
cleaning applications, including ultrasonic
systems specifically rated for use with
flammable solvents.
TECHNICAL & APPLICATION
ASSISTANCE
ITW Chemtronics

provides a technical
hotline to answer your technical and
application related questions. The toll free
number is: 1-800-TECH-401.
AVAILABILITY
ES1697 12 oz. Aerosol
ES897B 8 oz. BrushClean System
ES197 1 Gal. (3.7 L) Liquid
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 51%
HCFC-141b
HCFC-225
0.0%
0.0%
HFC
nPB
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly. ITW
CHEMTRONICS

does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (06/06)
Chemtronics and Flux-Off are registered trademarks of
ITW Chemtronics. All rights reserved. BrushClean is a
trademark of ITW Chemtronics. All rights reserved.
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
[phone]