User Manual

Product
(Color)
Key
Features
Mix Ratio
(Volume)
B:A
Approximate
Viscosity
75°F (24°C)
(cps)
Approximate
Mixed Worklife
at 75°F (24°C)
Approximate
Time to Handling
Strength at 75°F
(24°C)
Average
T-Peel at
75°F (24°C)
(piw)
Overlap Shear (psi)
-67°F
(-55
°C)
75°F
(24°C)
180°F
(82°C)
1:1 13,000 5 minutes 20 minutes 2 900 1,500 300
1:1 8,500 4 minutes 20 minutes 10 3,000 3,500 200
1:1 95,000 5 minutes 20 minutes 2 900 1,500 300
1:1 80,000 6 minutes 20 minutes 2 1,250 2,200 800
1:1 6,500 5 minutes 20 minutes 35 3,500 2,000 150
1:1 55,000 8 minutes 20 minutes 20 2,700 3,500 250
1:1 50,000 8 minutes 20 minutes 20 2,500 2,500 200
1:1 52,500 25 minutes 2.5 hours 35 3,400 4,300 400
1:1 15,000 25 minutes 2.5 hours 35 4,000 2,500 150
1:1 80,000 90 minutes 10 hours 20 1,500 2,500 400
1:1 10,000 80 minutes 6 hours 20 3,500 1,200 150
3M
™
Scotch-Weld
™
Structural Adhesives in Duo-Pak Cartridges and Bulk
Epoxy
3M
™
Scotch-Weld
™
Structural Adhesive EC2216
bonds honeycomb to aluminum for common
applications in aerospace and transportation.
3M
™
Scotch-Weld
™
Epoxy Adhesive DP420
bonds the stainless steel shaft into the stainless
steel head of a golf club with handling strength
in two hours.
3M
™
Scotch-Weld
™
Low Odor Acrylic Adhesive
DP810 requires minimal surface preparation for
bonding metal hinges into awning frames.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
* Available in Duo-Pak Cartridges only.
Duo-Pak Cartridges continued on next page.
General Purpose
Rigid bonds
Very flexible
Colorless
General Purpose
Non-sag
Flame Retardant
UL94 V-0 rating
Very flexible
Colorless
General Purpose
Flexible bonds
General Purpose
Flexible bonds
High Performance
Very flexible bonds
High Performance
Very flexible bonds
High Performance
Flexible bonds
High Performance
Flexible bonds
High Performance
Very flexible bonds
Rigid potting compound
Non-corrosive
Tough durable bonds
High impact resistance
Tough durable bonds
High impact resistance
Tough durable bonds
Non-sag
Tough durable bonds
High impact resistance
Tough durable bonds
Non-sag
DP100
(Clear)
DP100 Plus
(Clear)
DP100NS
(Translucent)
DP100FR
(White)
DP105
(Clear)
DP110
(Gray)
DP110
(Translucent)
DP125
(Gray)
DP125
(Translucent)
DP190
(Gray)
DP190
(Translucent)
EC2216*
(Gray)
DP270
(Black, Clear)
DP420
(Off-White)
DP420
(Black)
DP420NS
(Black)
DP460
(Off-White)
DP460NS
(Off-White)
3
2:3 80,000 90 minutes 10 hours 25 3,000 3,200 400
1:1 12,000 60 minutes 3 hours 2 1,200 2,500 300
2:1 30,000 20 minutes 2 hours 50 4,500 4,500 450
2:1 30,000 20 minutes 2 hours 50 4,500 4,500 1,250
2:1 180,000 20 minutes 2 hours 50 4,500 4,500 1,250
2:1 30,000 60 minutes 4 hours 60 4,500 4,500 700
2:1 125,000 60 minutes 4 hours 60 4,900 4,650 1,350
2
3
4
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
[phone]