User guide

ManualsBrandsHMC Electronics ManualsPower ToolsCESL611-ESD Delta Regis Brushless Electric Screwdriver

32VDC ESL600 Series Brushless Screwdrivers & Controllers

Operation Manual

CAUTION - Please read, understand, and follow all operating and safety instructions in

this manual before using the Tools and Controllers.

The 32VDC 600 Series tools are designed for exclusive use with specic Delta Regis

controllers as dened in this manual. Do not attempt to use the tools and/or controllers in

with any products other than as specied in this manual.

Doc. 32V_Brushless_Series_Manual_R2

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

(800) 482-4440

Summary of content (5 pages)

PAGE 1
32VDC ESL600 Series Brushless Screwdrivers & Controllers Operation Manual CAUTION - Please read, understand, and follow all operating and safety instructions in this manual before using the Tools and Controllers. The 32VDC 600 Series tools are designed for exclusive use with specific Delta Regis controllers as defined in this manual. Do not attempt to use the tools and/or controllers in with any products other than as specified in this manual. Doc.
PAGE 2
ESL600 Series Operation Manual Important - Installation and Safety Warning - Failure to understand and follow proper installation guidelines, safety requirements, and operating instructions may result in malfunction, component damage, property damage, shock hazard, fire hazard, injury or death. 1. Please read and understand the operation manual and follow all safety and operation instructions. 2. Use these products in a suitable dry, indoor location.
PAGE 3
ESL600 Series Operation Manual Inserting / Removing Bits Push the bit retainer inwards and it will release. The bit can now be inserted or removed. Adjusting Torque 1. Determine the torque output of the tool by checking a tightened fastener with a torque wrench. 2. Increase or decrease the torque by rotating the Torque Adjustment Ring. 3. Rotating the Ring clockwise increases torque output. 4. Rotating the Ring counterclockwise decreases torque output. 5. Check the adjustment with a torque wrench.
PAGE 4
ESL600 Series Operation Manual Specifications • Precise Torque Control, Low Torque Reaction. 600 Series • Quiet, Brushless DC motor means no carbon dust. • Compact body design results in exceptional manouverability and operator comfort. • Less heat build-up and higher duty cycle capabilities than conventional brush motors. 3 year motor warranty. • Brushless design results in low maintenance. • 32VDC Screwdrivers feature ESD safe housings. • CE, RoHS Compliant.
PAGE 5
ESL600 Series Operation Manual Torque Adjusting Nut Turn to adjust torque. Higher values on scale indicate higher torque. Numbers on the scale are for reference only and are not a torque indication.are not a torque indication. Trigger Bit Holder Retract sleeve to insert/remove bits. Suspension Ring Use to suspend the tool. Housing Nut Remove housing nut to install torque locking sleeve. Forward/Reverse Switch Three position switch with center position being OFF.