Owner manual

To set up a parameter:
1) Select one of the
Parameter
Profile
by tapping the button on the right side of the screen to toggle between the choices.
Note:
Torque Control
Angle Control
Profile Parameters
2) Select the
direction of rotation for the parameter by toggling between ‘clockwise’ and
‘counterclockwise’ at the top of the screen.
3)
Select the torque units by selecting the
selecting the units required.
4)
Name the parameter by selecting the button below the yellow
screen keypad to enter the desired name.
5)
Fill out the rundown characteristics by
keypad to enter the information.
6) Tap the yellow [<<]
button to return to the parameter list and select ‘Yes’ to save the changes.
Page 15
Parameter
buttons and select either Torque Control Profile
or Angle Control
by tapping the button on the right side of the screen to toggle between the choices.
Torque Control
Profiles Parameters will appear in BLUE
on the parameter list and
Profile Parameters
will appear in GREEN.
direction of rotation for the parameter by toggling between ‘clockwise’ and
‘counterclockwise’ at the top of the screen.
Select the torque units by selecting the
button at the top right hand corner of the screen, then
selecting the units required.
Name the parameter by selecting the button below the yellow
[<<]
button and using the on
screen keypad to enter the desired name.
Fill out the rundown characteristics by
tapping on the underlined areas and using the on
keypad to enter the information.
button to return to the parameter list and select ‘Yes’ to save the changes.
or Angle Control
by tapping the button on the right side of the screen to toggle between the choices.
on the parameter list and
direction of rotation for the parameter by toggling between ‘clockwise’ and
button at the top right hand corner of the screen, then
button and using the on
-
tapping on the underlined areas and using the on
-screen
button to return to the parameter list and select ‘Yes’ to save the changes.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440