User's Manual

User Guide | FreeSpeak II™
Page 4
4.2.3 Connecting to an RTS™ wired beltpack .......................................... 34
4.2.4 Front-panel adjustments for partyline connections .......................... 34
4.2.5 Troubleshooting partyline connections ........................................... 35
4.3 Wireless partyline ................................................................... 37
4.4 Connecting to 4-Wire and digital matrix intercom ....................... 38
4.4.2 Connecting to Clear-Com matrix plus ............................................ 40
4.4.3 Connecting to Clear-Com Eclipse digital matrix ............................... 40
4.4.4 Connecting with other digital matrix intercom systems .................... 41
4.4.5 Connecting with other 4-wire devices ............................................ 41
4.5 Connecting to a program audio source ...................................... 42
4.6 IFB configuration .................................................................... 42
4.7 Connecting to the stage announce output .................................. 43
4.8 Connecting to a PC ................................................................. 44
4.8.1 Connecting using the serial port ................................................... 44
4.8.2 Connecting using the LAN port ..................................................... 46
4.9 Connecting to transceiver/antennas .......................................... 46
4.9.1 Connecting one transceiver/antenna directly to a transceiver
port .......................................................................................... 46
4.9.2 Connecting transceiver/antennas with a splitter (PD2203) ............... 47
4.9.3 Powering an antenna or antenna splitter ........................................ 48
5 Operating the Base station .................................................. 49
5.1 Introduction ........................................................................... 49
5.2 Understanding Front-Panel Operation ........................................ 50
5.2.1 Call Channel A ............................................................................ 50
5.2.2 Call Channel B ............................................................................ 50
6 Programming a system from the Base station ..................... 54
6.1 Introduction ........................................................................... 55
6.2 Using the Base station’s programming menus ............................ 56
6.3 Saving changes ...................................................................... 56
6.4 Changing beltpack labels ......................................................... 56
6.4.1 To change a beltpack label ........................................................... 56
6.5 Setting and changing port labels .............................................. 58