User's Manual

The selection affects the gain, termination and call signaling used when communicating with
this port.
Figure 10-12 Partyline Port Type Menu
10.5.4 Selecting a communication path for the port
For headset, partyline, 4-wire ports and IFBs, you can select an audio path to determine the
destination for the port. To do so:
1) From the Cross Point Assignment left list, select the audio destination for the port.
For a front panel headset port, you can specify the port which is called when the Talk
button for that port is pushed.
For a partyline or 4-wire port, it causes a permanent talk path to be created from the
port to this destination.
For an IFB it creates an IFB from the port to the destination.
2) For 4-wire and partyline destination ports you can select talk and listen functions as
described in 10.4.10 Key assignment types. From the Cross Point Assignment right
list, select the required function.
113
FreeSpeak II User Guide