User Manual

C. Talk to Customers

1. Single-Lane Operation (one base station operating one speaker post)

Push-To-Talk (PTT) Mode:

! Alert tone (double beep) sounds, then customer can be heard at speaker post or menu board.

! Adjust customer’s voice level in headset if necessary.

! Press and hold A1 or A2 button to speak to customer. — Release to listen.

Hands-Free (HF) Mode:

! Alert tone (double beep) sounds, then customer can be heard at speaker post or menu board.

! Adjust customer’s voice level in headset if necessary.

! Touch and release A1 or A2 button to speak and listen to customer.

! Touch and release A1, A2 or B button to end communication with customer. You will hear a

double beep in your headset.

! Touch and release A1 or A2 button to speak to the customer again.

! If customer drives away from speaker post or menu board, headset automatically stops transmitting.

Auto Hands-Free (AHF) Mode:

! Alert tone (double beep) sounds, then customer can be heard at speaker post or menu board.

! Adjust customer’s voice level in headset if necessary.

! Speak and listen to customer without pressing any buttons.

! Touch and release A1, A2 or B button to end communication with customer. You will hear a

double beep in your headset.

! Touch and release A1 or A2 button to speak to the customer again.

! If customer drives away from speaker post or menu board, headset automatically stops transmitting.

2. Dual-Lane Operation (two base stations operating two speaker posts)

Push-To-Talk (PTT) Mode:

! Alert tone (double beep) sounds, then customer can be heard at speaker post or menu board.

! Adjust customer’s voice level in headset if necessary.

! Press and hold A1 button to speak to customer in Lane 1 or A2 button to speak to customer in

Lane 2. — Release to listen.

Hands-Free (HF) Mode:

! Alert tone (double beep) sounds, then customer can be heard at speaker post or menu board.

! Adjust customer’s voice level in headset if necessary.

! Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak and listen to customer.

! Touch and release A1, A2 (depending on lane) or B button to end communication with customer.

You will hear a double beep in your headset.

! Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak to the customer again.

! To change lanes, touch and release the opposite A button.

! If customer drives away from speaker post or menu board, headset automatically stops transmitting.

Auto Hands-Free (AHF) Mode:

! Alert tone (double beep) sounds, then customer can be heard at speaker post or menu board.

! Adjust customer’s voice level in headset if necessary.

! Speak and listen to customer without pressing any buttons.

! Touch and release A1, A2 (depending on lane) or B button to end communication with customer.

You will hear a double beep in your headset.

! Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak to the customer again.

! To change lanes, touch and release the opposite A button.

! If customer drives away from speaker post or menu board, headset automatically stops transmitting.