User's Manual

24
VI. SPECIFICATIONS
Base Station
1. Voltage input 16VAC ±2.5V
2. AC current input 350mA nominal, 1.4A maximum
3. Audio distortion <5% maximum level
4. Outside speaker output 3 watts RMS into 8 ohms
5. Ceiling speaker power 3 watts RMS into 8 ohms
6. Message repeater Message duration - 16 seconds
7. Controls/Switches 2-position vehicle detector switch
(Normal - Override/Reset)
2-position “Speed Team” ON/OFF switch
2-position “Message Repeater” ON/OFF switch
1-position “Record” switch
4-position RS485 bias/term switch
Outside speaker volume control
Outside speaker Hi-Lo volume jumper
Vehicle present tone level control
“A” sidetone
“B” sidetone
Inbound volume control
VAA level control
Ceiling speaker volume control
Vehicle present tone volume control
(3) 8-position DIP switches
4-position frequency select switch
Wireless/wired system select switch
Horn speaker/DM1 select switch
8. TX/RX Frequency FCC Part 90
9. Dimensions 8.2"H x 14.2"W x 3.5"D (208mm x 361mm x 89mm)
10. Weight 5.5 lbs (2.49kg) maximum
COM400CC COMMUNICATOR
®
1. Battery (NiMH) 8 hours
2. RF Frequency Receive — FCC Part 90
Transmit — FCC Part 90
3. Dimensions 3d"H x 4c"W x 1½"D (86mm x 114mm x 38mm)
4. Weight 12 ounces (3.40kg) — including battery
5. Controls Buttons "A," "B" and "C"
Power control
Volume control
6. Indicator Red LED
Solid when receiving only.
Blinking when transmitter is activated, or
on secondary lane for dual-lane systems
7. Connector LT