User's Manual

15
Figure 26. HS30 Headset
Figure 27. HS30 Headset transceiver
Installing and Removing HS30 Headset Batteries:
As a HS30 Headset battery weakens during routine use, you will hear a repeating
tone in the earpiece, indicating the battery in the transceiver needs to be replaced.
Typical HS30 battery life with normal use is 5 to 6 hours.
To install a fully charged battery in the HS30 Headset, insert the battery into the
battery compartment in the headset transceiver until its catch clicks securely in
place, as shown in Figure 26.
To remove the battery from a HS30 Headset, push the battery latch open and push
the battery from the opposite side of the headset transceiver, in the direction of the
arrow on the battery, as shown in Figure 27.
CAUTION: Turn headset OFF before removing batteries.