User's Manual

Figure 20. COM430BP COMMUNICATOR

Figure 21. Communicator controls

D. COM430BP COMMUNICATOR

The COM430BP COMMUNICATOR consists of a belt-pac transceiver unit and a

wireless headset designed to be used with the HME Wireless Drive-Thru Audio

System 400. The transceiver unit is worn in a pouch that clips to a belt or

waistband at the user's waist.

1. Communicator Controls

1 – Power button: turns Communicator on and off.

2 – Volume control buttons: adjust listening level in earpiece.

3 – Power-on light: lights yellow when Communicator power goes on, and

red when the HS30 Headset is also turned on. The power-on light also

indicates when the Communicator is transmitting in single or dual-lane

mode and when batteries need replacing.

4 – Button A: allows two-way communication when pushed and held; when it is

released, the user can listen only.

5 – Button B: must be pushed and held to talk, and released to listen.

6 – Button C: used to change lanes in dual-lane operations.

7 – Battery: provides power for the transceiver unit.

8 – Battery release latch: slides to release battery for removal, and snaps in

place when a battery is inserted to secure battery in Communicator.