User's Manual

Figure 13. Plug the headset-cable connector

into the cable receptacle

Figure 14. Insert belt through belt loop

on back of Communicator pouch

Figure 15.

Correct wearing of the

Communicator headset

2. Wearing the COM400BP COMMUNICATOR

Plug the headset-cable connector into the receptacle on the Communicator

transceiver as shown in Figure 13. The connector is keyed so it can only be

inserted in the correct position, with the cord extending downward. Loosen the

snap on the cord protection flap and resnap it with the flap over the cord.

Insert the Communicator belt

through the loop on back of the

Communicator pouch as shown

in Figure 14, and fasten the belt

securely around your waist. The

Communicator transceiver can be

worn over either your right or left hip.

Put the headset on your head and clip

one of t he clothing clips to your collar as

shown in Figure 15. Clip the other

clothing clip to the back of your shirt,

above your waist. Position the

microphone approximately 2 inches

(50.8 mm) from your mouth.