User's Manual

5
Routine Operation
SINGLE
-
LANE OPERATION
(one
speaker post)
DUAL
-
LANE OPERATION
(two speaker posts)
Hands
-
Free (HF) Mode:
Hands
-
Free (HF) Mode:
•
Alert tone (single beep) sounds in headset, then
customer at speaker post or menu board can be heard.
• Adjust customer’s voice level with up and down
arrows on belt-pac if necessary.
• Press and release A1 or A2 button to speak and
listen to customer. A single beep will be heard and
green light on belt-pac will come on when it begins
transmitting.
• Press and release A1, A2 or B button to end
communication with customer. Two beeps will be
heard and light on belt-pac will go off when it stops
transmitting.
• Press and release A1 or A2 button if you want to
speak to the customer again. A single beep will be
heard and green light on belt-pac will come on when
it begins transmitting.
• If customer drives away from speaker post or
menu board, belt-pac automatically stops
transmitting. Light on belt-pac will go off.
•
Alert tone (single beep for Lane 1, double be
ep for Lane 2)
sounds in headset, then customer at speaker post or menu board
can be heard.
• Adjust customer’s voice level in headset if necessary.
• Press and release A1 button for Lane 1, A2 for Lane 2, to
speak and listen to customer. A single beep will be heard and
light on belt-pac will come on when it begins transmitting.
(Lane 1 = green, Lane 2 = red)
• Press and release A1, A2 (depending on lane) or B button to
end communication with customer. Two beeps will be heard and
light on belt-pac will go off when it stops transmitting.
• Press and release A1 button for Lane 1 or A2 for Lane 2, to
speak to the customer again. A single beep will be heard and
light on belt-pac will come on when it begins transmitting.
(Lane 1 = green, Lane 2 = red)
• To change lanes, press and release the opposite A button. A
voice in the headset will say “Lane 1” or “Lane 2.”
• If customer drives away from speaker post or menu board, belt-
pac automatically stops transmitting. Light on belt-pac goes off.
Auto
Hands
-
Free (AHF) Mode:
Auto Hands
-
Free (AHF) Mode:
NOTE:
Only one
belt
-
pac
can be set for Auto Hands
-
Free at a time.
•
Alert tone (single beep) sounds in headset, then
customer at speaker post or menu board can be heard.
• Adjust customer’s voice level with up and down
arrows on belt-pac if necessary.
• Speak and listen to customer without pressing any
buttons. A single beep will be heard and green light
on belt-pac will come on when it begins transmitting.
• Press and release A1, A2 or B button to end
communication with customer. Two beeps will be
heard and light on belt-pac will go off when it stops
transmitting.
• Press and release A1 or A2 button if you want to
speak to the customer again. A single beep will be
heard and green light on belt-pac will come on when
it begins transmitting.
• If customer drives away from speaker post or menu
board, belt-pac automatically stops transmitting.
Light on belt-pac will go off.
•
Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu board
can be heard.
• Adjust customer’s voice level in headset if necessary.
• Speak and listen to customer without pressing any buttons. A
single beep will be heard and light on belt-pac will come on
when it begins transmitting. (Lane 1 = green, Lane 2 = red)
• Press and release A1, A2 (depending on lane) or B button to
end communication with customer. Two beeps will be heard
and light on belt-pac will go off when it stops transmitting.
• Press and release A1 button for Lane 1 or A2 for Lane 2, to
speak to the customer again. A single beep will be heard and
light on belt-pac will come on when it begins transmitting.
(Lane 1 = green, Lane 2 = red)
• If customer drives away from speaker post or menu board,
belt-pac automatically stops transmitting. Light on belt-pac will
go off.
Push
-
To
-
Talk (PTT) Mode:
Push
-
To
-
Talk (PTT) Mode:
•
Alert tone (single beep) sounds in headset, then
customer at speaker post or menu board can be heard.
• Adjust customer’s voice level with up and down
arrows on belt-pac if necessary.
• Press and hold A1 or A2 button to speak to
customer. A single beep will be heard when belt-pac
begins transmitting. Green light on belt-pac will be
on while transmitting.
•
Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu board
can be heard.
• Adjust customer’s voice level in headset if necessary.
• Press and hold A1 button to speak to customer in Lane 1; A2 to
speak to customer in Lane 2. A single beep will be heard when
belt-pac begins transmitting. Light on belt-pac will be on while
transmitting. (Lane 1 = green, Lane 2 = red)
• To change lanes, press and release the opposite A button.
A voice in the headset will say “Lane 1” or “Lane 2.”
“B” Channel Hands
-
Free (BHF) Mode:
•
Press and release
B
button to speak and listen to other crew members. A single beep will be heard and light on belt
-
pac will come on (alternating red/green) when belt-pac is transmitting.
• Press and release B button to end communication with crew members. Two beeps will be heard and light on belt-pac
will go off when transmitting stops.
•
Press and release
B
button if you want to speak to crew members again.
NOTE: Pressing A1, A2 or B and talking when someone else is talking will not stop them from being heard, but you
and the other person will be heard at the same time.