User's Manual

3
For ion IQ
™
Audio Systems, register each COMMUNICATOR
®
as follows:
NOTE: On the base station displays, “headset” refers to either Belt-Pacs or All-In-One Headsets.
•
••
• On the ion IQ base station STATUS display, press the Menu button.
•
••
• On the MAIN MENU display, press the Register button.
•
••
• The REGISTRATION display indicates the number of belt-pacs already registered and how many more
can be registered.
 If you would like to unregister some of your belt-pacs, turn OFF all the ones you want to unregister and
turn ON all the ones you want to remain registered, and then press the Clear Inactive button on the
REGISTRATION display to unregister all the belt-pacs that are not turned on, and press the Clear
Inactive button on the CLEAR INACTIVE REGISTRATIONS display.
 If you would like to unregister all of your belt-pacs, press the Clear All button on the REGISTRATION
display and then press the Clear All button on the CLEAR ALL REGISTRATIONS display.
CAUTION: When clearing all belt-pacs, the base station will shut down and re-start.
Begin registration:
•
••
• To register belt-pacs, press the Register Headset button on the REGISTRATION display.
•
••
• On the TO REGISTER HEADSETS display, follow the instructions in the box.
•
••
• To register only one belt-pac, press the Register Single button.
To register more than one belt-pac, press the Register Multi button.
When each registration is successfully completed:
•
••
• The ID number assigned to this belt-pac will be shown.
ID numbers are assigned sequentially as 0 thru 9, A, b, C, d and E.
•
••
• The power light on the belt-pac will remain on steady green.
•
••
• When you have finished registering belt-pacs, press the Back button to exit the registration mode. You can
repeat pressing the Back button until you return to the MAIN MENU or STATUS display.