User Manual

16
Base Station Intercom Configuration:
Select intercom IC1 or IC2, then use the up and
down buttons to select what mode the intercom is in.
Select the IC Lvl box, and use the control knob to
adjust the input gain level.
NOTE: If the Mode is set to Off, the input and
output of that intercom will be off. If set for
2-wire, both 2 and 4-wire will be active. If set for
4-wire, only 4-wire interface will be active.
Base Station Auxiliary Input Level:
Use the control knob to adjust the auxiliary input
level. Any change made here will be reflected in
the Monitor Input display for Aux Input.
Base Station Microphone Input Level:
Use the control knob to adjust the front-panel
headset microphone input level. Any change
made here will be reflected in the Monitor Input
display for the Mic Input.