User's Manual

1
The DX200 provides private, secure communication. Each base station can have up to fifteen Beltpacs
“registered” to it. Four of the fifteen Beltpacs can transmit at the same time. However, by connecting two or
more base stations together, these numbers can be increased. For example, two base stations can support thirty
Beltpacs, of which eight can transmit at the same time. Beltpacs can be used either in the push-to-talk or hands-
free mode. The base station operator can stop any Beltpac from transmitting.
The DX200 can be used with RTS
®
and Clear-Com
®
cabled intercom systems. On the intercom channel, 2-wire
and 4-wire cabled intercoms can be operated at the same time. Also, using the AUX In and AUX Out
connections, a second 4-wire intercom channel can be used.
Either a monitor speaker or a local headset can be used with the DX200. Using a local headset, the base station
operator can talk to crew members on the cabled intercom channel, Beltpacs only or all channels.
The base station can be operated using standard DC electricity or a vehicle electrical system for mobile
operation. A power adapter and cable are included with the base station.
SECTION 1. INTRODUCTION