User's Manual

8 Programming on the beltpack .................................................................... 77
8.1 Introduction to programming on the beltpack ................................................. 77
8.2 Configuring the beltpack volume settings ...................................................... 78
8.2.1 Configuring the beltpack channel volumes and master volume ........................... 78
8.2.2 Configuring the volume level of the line input ....................................................... 78
8.2.3 Configuring the rotary controls ............................................................................. 79
8.3 Configuring the beltpack headset .................................................................. 79
8.3.1 Setting headset autodetect ................................................................................... 79
8.3.2 Setting the sidetone level ..................................................................................... 80
8.3.3 Setting the headset limiter .................................................................................... 80
8.4 Configuring the beltpack microphone ............................................................ 80
8.4.1 Setting the microphone type ................................................................................. 80
8.4.2 Setting the microphone echo cancellation ............................................................ 81
8.5 Configuring the beltpack display and LEDs ................................................... 81
8.5.1 Setting the display and LED brightness ............................................................... 81
8.5.2 Setting the display dim timeout............................................................................. 82
8.5.3 Setting the display off timeout .............................................................................. 82
8.6 Configuring the beltpack alarm options ......................................................... 82
8.6.1 Setting the low battery alarm ................................................................................ 82
8.6.2 Setting the low battery alarm threshold ................................................................ 83
8.6.3 Setting the out of range alarm .............................................................................. 83
8.6.4 Setting the call alert .............................................................................................. 84
8.7 Selecting the beltpack role default set ........................................................... 84
8.8 Selecting the beltpack administration ............................................................ 84
8.8.1 Enabling OTA registration mode .......................................................................... 85
8.8.2 Setting full menu access ....................................................................................... 85
8.8.3 Setting system sync mode .................................................................................... 86
8.9 Setting the listen again option ....................................................................... 86
8.10 Accessing beltpack information ..................................................................... 86
8.11 Setting display mode ..................................................................................... 87
8.12 Setting system connect ................................................................................. 87
8.13 Enabling over the air (OTA) registration mode from a beltpack .................... 87
8.14 Performing a site survey ................................................................................ 88
9 Operating the transceiver/antenna ............................................................ 89
9.1 Transceiver/antenna ..................................................................................... 89
6
FreeSpeak II User Guide