User's Manual
Table Of Contents
- Document Reference
- 1 Important Safety instructions
- 2 Introduction to FreeSpeak II™
- 3 Installing a system
- 4 Connecting the Base station
- 4.1 Understanding the Back-Panel Connectors
- 4.2 Connecting to partyline intercom systems
- 4.3 Wireless partyline
- 4.4 Connecting to 4-Wire and digital matrix intercom
- 4.5 Connecting to a program audio source
- 4.6 IFB configuration
- 4.7 Connecting to the stage announce output
- 4.8 Connecting to a PC
- 4.9 Connecting to transceiver/antennas
- 5 Operating the Base station
- 6 Programming a system from the Base station
- 6.1 Introduction
- 6.2 Using the Base station’s programming menus
- 6.3 Saving changes
- 6.4 Changing beltpack labels
- 6.5 Setting and changing port labels
- 6.6 Setting and changing group labels
- 6.7 Adding group members
- 6.8 Beltpacks
- 6.9 Assigning audio routes to a beltpack
- 6.10 Setting the beltpack audio level
- 6.11 Setting beltpack latching
- 6.12 Over the Air (OTA) beltpack registration from the Base station
- 6.13 Setting input and output port levels
- 6.14 Setting port call destination
- 6.15 Configuring a wired partyline
- 6.16 Base station System Menu
- 6.17 System Info
- 6.18 Restoring the Defaults
- 6.19 Antennas
- 6.20 Setting the IP address
- 6.21 Locking front-panel enable buttons
- 6.22 Remote microphone kill
- 6.23 Battery indicator
- 7 Operating the wireless beltpack
- 8 Programming on the beltpack
- 8.1 Introduction to programming on the beltpack
- 8.2 Configuring the beltpack volume settings
- 8.3 Configuring the beltpack headset
- 8.4 Configuring the beltpack microphone
- 8.5 Configuring the beltpack display and LEDs
- 8.6 Configuring the beltpack alarm options
- 8.7 Selecting the beltpack role default set
- 8.8 Selecting the beltpack administration
- 8.9 Setting the listen again option
- 8.10 Accessing beltpack information
- 8.11 Setting display mode
- 8.12 Setting system connect
- 8.13 Enabling over the air (OTA) registration mode from a beltpack
- 8.14 Performing a site survey
- 9 Operating the transceiver/antenna
- 10 FS II Configuration Editor
- 10.1 Loading configurations
- 10.2 Configuration Editor Screen basics
- 10.3 Registering beltpacks using the over the air (OTA) facility
- 10.4 Configuring beltpacks
- 10.4.1 Selecting the beltpack to register or edit
- 10.4.2 Registering beltpacks using the micro USB cable
- 10.4.3 Viewing beltpack registration information
- 10.4.4 Viewing beltpack properties
- 10.4.5 Beltpack audio levels
- 10.4.6 Beltpack alarm options
- 10.4.7 Setting the beltpack role options
- 10.4.8 Assigning beltpack keys
- 10.4.9 Configuring the Reply key
- 10.4.10 Key assignment types
- 10.5 Configuring ports
- 10.6 Configuring groups and wireless partylines
- 10.7 Reducing antenna interference
- 10.8 Configuring IFBs
- 10.9 Configuring Base station system parameters
- 10.10 Diagnostics
- 11 Specifications
- 12 Compliance
6.13.2 Output level........................................................................................................... 57
6.13.3 To set the audio level for a port ............................................................................ 58
6.14 Setting port call destination ........................................................................... 59
6.15 Configuring a wired partyline ......................................................................... 61
6.15.1 To select the type of partyline system for a partyline port .................................... 61
6.15.2 To configure the Noise Gate for a partyline port .................................................. 62
6.15.3 To configure the levels for a partyline port ........................................................... 63
6.16 Base station System Menu ............................................................................ 65
6.17 System Info ................................................................................................... 66
6.18 Restoring the Defaults ................................................................................... 66
6.19 Antennas ....................................................................................................... 66
6.20 Setting the IP address ................................................................................... 67
6.21 Locking front-panel enable buttons................................................................ 67
6.22 Remote microphone kill ................................................................................. 68
6.22.1 Kill beltpack microphones ..................................................................................... 68
6.22.2 Kill partyline microphones ..................................................................................... 68
6.22.3 Kill all microphones ............................................................................................... 68
6.23 Battery indicator ............................................................................................ 68
7 Operating the wireless beltpack................................................................. 69
7.1 Overview of the wireless beltpack ................................................................. 69
7.2 Beltpack user controls ................................................................................... 70
7.2.1 Top controls .......................................................................................................... 70
7.2.2 Beltpack display .................................................................................................... 71
7.2.3 Front controls ........................................................................................................ 71
7.2.4 Beltpack bottom connectors ................................................................................. 72
7.2.5 Beltpack rear panel ............................................................................................... 73
7.3 Using the beltpack ......................................................................................... 74
7.3.1 Registering the beltpack ....................................................................................... 74
7.3.2 Charging the beltpack ........................................................................................... 74
7.3.3 Powering on the beltpack ..................................................................................... 75
7.3.4 Using the beltpack to communicate ..................................................................... 75
7.3.5 Entering and exiting Menu mode .......................................................................... 76
7.3.6 Setting and Adjusting Listen Levels ..................................................................... 76
7.3.7 Updating the beltpack software ............................................................................ 76
7.3.8 Updating the Configuration Editor ........................................................................ 76
5
FreeSpeak II User Guide