User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
Level 1 Level 2 Level 3 Level 4
Sorting
Number
/Alphabetical
Battery Type
Alkaline/NiMh (for
use when not using
the supplied Li-ion
type batteries)
Software Current View current version
Update
Use this to update
the Base using a
USB stick.
License Connections
View connected
ports
Licensed Ports
View licensed ports:
l Total Ports
l Wireless
Ports
l Dante Ports
l Any Ports
Reset Reboot
Press rotary 4 to
reboot now
Reset to Default
Reset Base. When
you reset the Base
here, as well as
system setup details
(channels and
roles), network
details (IP
addresses) are also
reset. This is not the
case when resetting
the Base in the
CCM. After resetting
you must Add
Page 94