User's Guide

User Guide | Arcadia Central Station
1.
On the left panel, click GPI1 to select it.
2.
Click the Add button in the center panel.
3.
Click the Options button to select a Source. Select the Edge Base.
4.
Click the Options button to select a Destination. Select the required Channel.
5.
Click the blue check mark.
6.
To label the GPI, click the pencil icon.
7.
To test the GPI, or turn it on and off, navigate to Status > Logic.
6.8.5 How to configure GPOs
In this example you will sent an output trigger (for example to an external stage announce
speaker) on GPO1 when Talk is activated on stage announce (SA).
1.
Navigate to Configuration > Logic.
2.
On the left panel, click GPO1 to select it.
3.
Click the Add button in the center panel.
4.
Click the Options button to select a Key Target. Select stage announce (SA).
5.
In this case, the On Behavior field defaults to Talk Only.
6.
Click the blue check mark.
7.
To label the GPO, click the pencil icon.
8.
To test the GPO, navigate to Configuration > Logic.
Page 70