User's Guide
Table Of Contents
- 1 Introduction
- 2 Installing Arcadia Central Station
- 2.1 Front Panel Connectors, Controls and Indicators
- 2.2 Intercom Touchscreens
- 2.3 Rear Panel Connectors and Indicators
- 2.4 System Powering
- 2.5 Clear-Com Ethernet Cable Recommendations
- 2.6 Stage Announce and Program Feed
- 2.7 Set the Arcadia Central Station IP address
- 2.8 Save and Restore System Configuration
- 2.9 Reset to Default
- 2.10 Example Applications
- 3 Connecting to other systems
- 4 Network Setup
- 5 Core Configuration Manager (CCM) walkthrough
- 6 CCM configuration
- 6.1 Setting up the Arcadia Central Station
- 6.2 Adding IP Transceivers (FS Edge, FS II 1.9, 2.4)
- 6.3 Registering beltpacks
- 6.4 Viewing and adding Channels
- 6.5 Viewing and Adding Members to Groups
- 6.6 Channels or Groups?
- 6.7 Creating and Editing Roles
- 6.8 Set up GPIOs and Logic Events
- 6.9 Monitoring Your System from the CCM
- 7 Security
- 8 Configuring from the Front Panel
- 9 Spare parts
- 10 Terminology/glossary
- 11 Front Panel Menu Reference Tables
- 12 Specifications
- 13 Pinouts
- 14 Regulatory compliance
User Guide | Arcadia Central Station
Item Description
A
Channel indication. Audio routes can be point-to-point or
channels.
B
Beltpacks can be registered by USB from the front panel. A
visual indication on the right intercom screen shows
sucessful registration.
C Reply button. Use CLEAR to clear the reply stack.
2.3 Rear Panel Connectors and Indicators
The FreeSpeak Arcadia rear connectors and indicators are listed below.
Item Description
A Internal power connector. Mains power lead with internal power supply.
B Grounding screw.
C
General Purpose Input/Output connectors x2 (DB-9F).
l GPIO 1 hosts GPI1 and GPO1 & 2
l GPIO 2 hosts GPI2 and GPO 3 & 4.
D XLR 2-Wire Partyline connectors (standard microphone cable)
E
RJ45 4-Wire audio and data connectors. Port 8 is dedicated to Program Feed
(PGM) and Stage Announce (SA), to be used with the split XLR cable
connector that is supplied with the Arcadia Central Station.
F Dect Sync RJ45 connectors
G
E1 RJ45 connectors to splitter/transceiver. Do not connect IP transceivers
here.
Page 12