User's Manual

Message Playback Settings

 Routing − To choose where the selected Alert message will be heard, press the

Settings button on the EDIT ALERT MESSAGE display, and then press the

Headsets button on the EDIT ALERT SETTINGS display.

On the SELECT ALERT HEADSETS display, use the ▲(up) or ▼(down) buttons

to select a headset number for which you would like to turn the selected Alert

message on or off, and then press the Edit button.

To select/deselect the headset where the message will be heard, press the Select

headset button on the EDIT display to highlight ✔(on) or −(off). To select/ deselect

all headsets, press the Apply to all headsets? button to highlight Yes or No. Press

the Back button to save this setting.

Note: After selecting ✔(on), to hear the message in the ceiling speaker or Line Out, be

sure their volume is set high enough for the message to be heard. To do this, return

to the MAIN MENU and select Volume adjust to make the necessary adjustments.

For multiple-lane

operations,

see

Appendix,

Alert Messages.

To have the selected Alert message heard or

not heard in the ceiling speaker(s), press the

Hear in ceiling speaker button to highlight

✔(on) or −(off).

To have the selected Alert message heard or

not heard in the line out(s), press the Hear in

Line Out button to highlight ✔(on) or −(off).