User's Manual

2
1.1 Base Station Features
The base station is the electronic heart of the EOS|HD. It contains the circuitry
through which all functions of the drive-thru audio system are channeled.
External base station features are shown in Figures 2 and 3. Internal connectors
and controls are shown in
Figure 24.
1.1.1 Front Panel
 The display screen is where all menu selections will be seen for installer setups and
routine operation options. These instructions and the display screens shown are
primarily for single-lane drive-thru operations. For multiple-lane operations, where
additional settings are required, you will be directed to the Appendix.
 The LANE STATUS display will be shown on the base station until you press any of
the buttons to select another display. The display screen will go dark after a period
of inactivity; pressing any button will light it up.
 The menu-select buttons are used to make selections from the menu on the
display screen.
 The Help button can be pushed to obtain information needed in case of problems
with the EOS|HD.
 The Back button can be pushed to go back to the previous menu display.
 The activity indicators light up as follows:
Lane 1 activity (above the line)
― A1 lights up when the A button is pushed on any Lane 1 headset.
― B1 lights up when the B button is pushed on any Lane 1 headset.
― The car above the line lights up when a car is present at the Lane 1 menu board.
Lane 2 activity (below the line)
― A2 lights up when the A button is pushed on any Lane 2 headset.
― B2 lights up when the B button is pushed on any Lane 2 headset.
― The car below the line lights up when a car is present at the Lane 2 menu board.
Figure 2. Base station front panel features
Back button
Display screen
Menu-select
buttons
Help button
Activity
indicators