User's Manual

VAA Settings

VAA settings can be adjusted to eliminate echo, feedback or fluctuating inbound audio

levels. To turn the VAA feature on/off, or to adjust VAA levels, press the More button

on the STORE SETTINGS display. On the ADVANCED STORE SETTINGS display,

press the VAA button.

Note: If you have a dual lane drive-thru operation, you may need to make this

adjustment for each lane.

VAA ✔(on) or −(off):

To turn the VAA feature on or off, press the VAA button to select ✔(on) or −(off).

VAA Sensitivity Level:

This is the volume level of the order taker’s voice required to activate the VAA circuit.

During normal operation, the inbound audio level should be reduced when the Order

Taker speaks to the customer, and should recover when the Order Taker stops

speaking. If speaking to the customer does not automatically reduce the inbound level,

press the VAA sensitivity button and then press the + and − buttons to adjust

sensitivity to the Order Taker’s voice.

VAA Attenuation Level:

This is the amount that the inbound volume level is reduced when the Order Taker

speaks to the customer. The attenuation level is factory set at 15dB, and should not

require adjustment.

If the Order Taker cannot hear the inbound audio at all while speaking, the VAA

attenuation can be adjusted to a lower level. To make this adjustment, press the

VAA attenuation button and then press the + and − buttons until the desired level is

reached. If you do not want any attenuation, please just turn off VAA without

adjusting this setting.

Note:

In multiple-lane

configurations,

VAA settings will

appear for Lanes 1

and 2. Settings

will be similar for

both lanes.