User's Manual

33
 IP Address – the internet protocol address of the base, used to identify the base on
the local network.
.
 Subnet – is a setting used by the base to identify if outgoing network packets are
intended for the local network or intended to be routed to an external network via the
gateway.
 Gateway address – is a router address on the local network used to move network
packets from an external network into the local network and vice-versa.
 DNS1 & DNS2 – are addresses of domain name servers that resolve host/domain
names into IP addresses. The DNS servers are used when sending email to a mail
server identified by its name.
To edit this setting, press the IP Address button
and then, on the EDIT STATIC IP ADDRESS
display, use the ◄ and ► buttons to move the
highlight to each number you would like to
change, and press the + or − button to enter the
desired number.
To edit this setting, press the Subnet button
and then, on the EDIT STATIC SUBNET
display, use the ◄ and ► buttons to move the
highlight to each number you would like to
change, and press the + or − button to enter the
desired number.
To edit the Gateway address, press the Gateway
address button and then, on the EDIT STATIC
GATEWAY ADDRESS display, use the ◄ and ►
buttons to move the highlight to each number
you would like to change, and press the + or −
button to enter the desired number.
To edit the DNS address, press the DNS1 or DNS2
button and then, on the EDIT DNS ADDRESS
display, use the ◄ and ► buttons to move the
highlight to each number you would like to
change, and press the + or − button to enter the
desired number.