Daim Ntawv Qhia Tus Neeg Siv

30
8.3 SAMPLE PLAYBACK
Once the sample is assigned to a track it can be triggered either by the sequencer or
manually by pressing a [TRIG] key. You also have to ability to set the sample's play mode
and edit what portion of the sample is played.
1. Press [SRC] to access the SOURCE page.
2. Use DATA ENTRY knob B to set the PLAY MODE behavior of the sample.
• REVERSE The sample will be played back in reverse once every time it is trigged.
• REVERSE LOOP The sample will loop continuously in reverse between Loop
Position and Length. How long it will loop for is set with the LEN parameter on the
TRIG page The loop time is also constrained by the AMP page envelope parameter
settings HLD and DEC.
• FORWARD LOOP The sample will loop continuously between Loop Position and
Length. How long it will loop for is set with the LEN parameter on the TRIG page.
The loop time is also constrained by the AMP page envelope parameters HLD and
DEC.
• FORWARD The sample will be played back once every time it is trigged.
3. Use DATA ENTRY knobs E, F, and G to set the STRT, LEN, and LOOP parameters
which define what portion of the sample is played. Press [SRC] twice to access
SRC page 2, in order to more easily see these settings using the sample waveform.