Daim Ntawv Qhia Tus Neeg Siv

28
8. SAMPLING
Digitakt can also sample audio. It can sample audio from external sources via the external
inputs or USB, and it can also sample audio internally from the Digitakt itself.
8.1 SAMPLING FROM THE EXTERNAL INPUTS
1. Connect your audio source to the INPUT L/R inputs of the Digitakt.
2. Press [SAMPLING] to access the SAMPLING menu and then use DATA ENTRY
knob G to set SOURCE to IN L+R.
3. Keep an eye on the audio input meter and play the audio source and make sure that
the volume of the audio source is as strong as possible, but without clipping. Set
MON to YES to monitor the incoming audio through the Digitakt.
4. Again, with an eye on the audio input meter and use DATA ENTRY knob F to set
THRESHOLD just above the indicated background noise of the audio source (when
it is not playing).
5. Use RLEN to set the length of the sampling.
6. Press [YES] to arm the sampling and then play the sound source. When the input
audio exceeds the set THRESHOLD level, sampling will start.
7. Press [YES] when you want to stop the sampling.
8. Use the DATA ENTRY knobs A and C to set the parameters TRIM START and TRIM
END to trim the sample to the desired length. You can use the DATA ENTRY knobs
B and D to zoom in and out to make it easier to see where to trim the sample. Press