Daim Ntawv Qhia Tus Neeg Siv

27
7.9 PARAMETER LOCKS
Parameter locks enable all trigs to have their own unique parameter values. The note trigs
of an audio track can, for example, have dierent pitch, amp or filter settings. It is possible
to parameter lock all parameters found on the PARAMETER pages, and you can apply
parameter locks to all types of tracks.
In GRID RECORDING and STEP RECORDING mode, press and hold the [TRIG] key of
a trig and then adjust the parameters you want to lock using the DATA ENTRY knobs
to apply parameter locks. The graphics on the screen becomes inverted for the locked
parameter and shows the locked parameter value. The [TRIG] key of the locked trig will
begin to flash, to indicate that the trig now contains a parameter lock.
In LIVE RECORDING mode, turn a DATA ENTRY knob to add parameter locks to the active
track. The parameter will be locked accordingly and placed on the sequencer steps.
7.10 PATTERN SCALE
It is possible to change the length and timing of the pattern. The leftmost figure on the
screen shows the number of steps in the pattern. The total length which is shown on the
right determines the maximum number of steps. The rightmost figure controls the time
signature of the pattern. If you use 17 steps or more in a pattern, the [PAGE] key can is to
toggle between the dierent pattern pages when in GRID RECORDING mode.
1. Press [FUNC] + [PAGE] to access the scale menu.
2. Use the [ARROW] keys [LEFT] and [RIGHT] to toggle between step length and
scale.
3. Use the [ARROW] keys [UP] and [DOWN] to change the settings. You can also use
the LEVEL/DATA knob to change settings.
7.11 PATTERN SWING
Adjust the swing setting of the pattern, to employ a propulsive, rhythmic groove.
1. Press [TEMPO] to access the tempo/swing menu.
2. Set the SWING ratio from 50% to 80%, by turning DATA ENTRY knob E.
The default setting is equal spacing, 50%.