Daim Ntawv Qhia Tus Neeg Siv

26
7.7 LIVE RECORDING MODE
LIVE RECORDING mode is the second method of adding trigs to the tracks. In this record-
ing mode, all the [TRIG] keys are played in real time to input trigs to the tracks. It is also
possible to enter parameter locks in real time.
1. Press and hold [RECORD], then press [PLAY] to enter LIVE RECORDING mode.
(Press [PLAY] twice while keeping the [RECORD] key pressed to activate/deacti-
vate automatic quantization.) The sequencer will start to play, and the [RECORD]
key will start to flash red.
2. Enter trigs to all tracks of the sequencer in real time by tapping the [TRIG] keys.
3. Press [PLAY] to exit LIVE RECORDING mode while keeping the sequencer playing.
If LIVE RECORDING mode is active and [RECORD] is pressed, GRID RECORDING
mode will be activated.
4. Press [STOP] to stop both recording and playback of the sequencer.
7.8 STEP RECORDING MODE
STEP RECORDING is a quick and straightforward method of placing trigs on the sequenc-
er. In this recording mode, you insert notes by pressing the [TRIG] keys or via an external
MIDI controller. The sequencer then captures the note and automatically advances to the
next step.
1. Press [RECORD] + [STOP] to enter STEP RECORDING mode. The [RECORD] key
starts to double-blink red. (Press [STOP] twice while keeping the [RECORD] key
pressed to toggle between STANDARD and JUMP mode).
2. Press a [TRIG] key to select the active step to where you want to start to add note
trigs. The active step is shown with a green [TRIG] key that double-blinks. (If posi-
tioned on an earlier placed trig, it inherits the light pattern of that trig). You can also
use [LEFT]/[RIGHT] to select the active step or skip steps.
3. Press and hold [FUNC] and then press [TRIG 1–16] key to add a note trig on the
corresponding track to the active step. The active step then automatically advances
to the next step.