Daim Ntawv Qhia Tus Neeg Siv

Table Of Contents

5. EXPERIMENTING WITH PATTERNS

5.1 PLAYING THE FACTORY PRESETS

You can ﬁnd a number of preset patterns, Sounds, and samples in the Digitakt. Follow the

instructions below to get started exploring your new instrument.

1. Press [BANK] and then press [TRIG 9] key to select bank A. The screen reads

“BANK A : SELECT PTN”.

2. Press [TRIG 1] key to select the ﬁrst pattern of bank A.

3. Press [PLAY] to listen to pattern A01.

4. Press [PTN] and then press [TRIG 2] key to select pattern A02. It will start once

pattern A01 has reached its end. Select pattern A03 by pressing [PTN] and then

press [TRIG 3] key, and so on.

5. Press [STOP] to stop playback.

5.2 USING CHROMATIC MODE

You can use the [TRIG] keys to play any audio track sample chromatically.

1. Select the audio track to play chromatically by pressing [TRK] + one of the [TRIG

1–8] keys.

2. Press [FUNC] + [TRK] to enter CHROMATIC mode. The [TRIG] keys will light up

in a pattern that resembles an octave of a piano keyboard layout. Only lit keys are

playable.

3. Play the [TRIG] keys. The active track Sound will be pitched dierently for each

of the playable keys. Press the [ARROW] keys [UP] or [DOWN], to transpose the

virtual keyboard up or down one octave.

5.3 USING MUTE MODE

You can mute any of the sequencer tracks in this mode. Unlike CHROMATIC mode, it

makes no dierence which track is active when this mode is activated. You can access all

tracks simultaneously.