Daim Ntawv Qhia Tus Neeg Siv

15
2. SETTING UP AND STARTING DIGITAKT
Make sure you place the Digitakt on a stable support, such as a sturdy table, with su-
cient space for the cables. Make sure to switch o all devices before you connect the
Digitakt to other devices.
1. Plug the supplied DC adapter to a power outlet and connect the small plug to the 12 V
DC In on the Digitakt.
2. Connect OUTPUT L/R from the Digitakt to your mixer or amplifier.
3. To control the Digitakt from a computer, connect a USB cable between the computer
and the USB connector of the Digitakt.
4. If you want to use MIDI to control the Digitakt, connect the MIDI OUT port of the device
you wish to send data from to the MIDI IN port of the Digitakt. The MIDI THRU port
duplicates the data arriving at the MIDI IN port, so it can be used for chaining MIDI
units together. If you want to use Digitakt to control other devices using MIDI, connect
the MIDI OUT port of the Digitakt to the MIDI IN port of the of the device you want to
control.
5. If you want to sample audio from external sources, connect the audio source to INPUT
L/R or via USB.
6. Switch on all units. Switch on the Digitakt by pressing the Power switch located at the
back of the unit.